Description
Hepa Filter for Heracell Incubator 150i & 240i
We KG Medical Industries is best supplier of Hepa Filter for Heracell Incubator in India since long time. Heracell 150i & 240i CO2 Incubator Filter manufactured by Thermo Scientific. It is also known as Heracell Gas Inlet Filter also. heracell 150i hepa filter replacement is also very easy it can be done by end user.
What is Hepa Filter for Heracell Incubator?
A Hepa (high-efficiency particulate air) filter for a Heracell incubator is a type of air filter that helps to maintain a sterile and clean environment within the incubator. It is designed to capture small particles and contaminants, including bacteria, viruses, and fungal spores, and prevent them from circulating within the incubator. This helps to prevent contamination of cell cultures and ensure reliable and consistent results.
What is the use of Hepa Filter for Heracell Incubator?
The use of a Hepa (high-efficiency particulate air) filter for a Heracell incubator is to maintain a sterile and clean environment within the incubator. It is used backside of Heracell 150i and 240i Co2 Incubator. It cleans carbon dioxide upto 99.9%. It helps to capture small particles and contaminants, such as bacteria, viruses, and fungal spores, and prevent them from circulating within the incubator.
Product Specification
| Product Manufacturer | Thermo Scientific |
| Brand | Thermo |
| Product Material | High Grade Plastic |
| Packaging | Each Filter comes in individually sterile pack. |
| Current Applicable Government Tax in India* | 18% |
| Uses |
|
| Product Filter | High Grade Filter |
| Filter Capacity | 99.97% |
| Product Features | Clearing of Gas |
| Compatible |
|
Product Technical Name : Heracell Gas Inlet Filter | |
| Product Shape | Round |
| Product Color | White* |
| Expiry | As per uses. |
| Payment terms | Advance. |
| Product Delivery Time | As per stock |
| Is Product Tested | Yes |
| Product Warranty / Guarantee | Not Available |
| Product other name if available | Not Available |
| Replacement | Not Applicable |
| Insurance | Available on Extra Payment by the buyer only. |
| Similar Products | |
How to replace Hepa Filter for Heracell 150i & 240i CO2 Incubator Filter
To replace the Hepa Filter for Heracell 150i & 240i CO2 Incubator Filter, follow these general steps:-
- Safety Precautions: Before starting the replacement process, ensure that the incubator is turned off and disconnected from the power source. Also, make sure that the carbon dioxide gas supply is shut off and the pressure has been released from the system to prevent any potential hazards.
- Locate the Filter Housing: Identify the location of the HEPA filter housing in the carbon dioxide gas line. Typically, it will be installed at the backside of the Heracell CO2 Incubator. Refer to the product manual or any instructions provided by the manufacturer for precise information on the filter’s location.
- Remove the Old Filter: Open the filter housing by releasing any latches, screws, or connections that secure it in place. Carefully remove the old HEPA filter from the housing, making sure to disconnect any tubing or fittings connected to it. Take note of the orientation and positioning of the old filter to aid in installing the new one correctly.
- Prepare the New Filter: Unpack the new HEPA filter from its packaging. Ensure that it is the correct replacement filter for the carbon dioxide gas line and is compatible with the Heracell CO2 Incubator model. Inspect the filter for any visible damage or defects before proceeding.
- Install the New Filter: Connect the new HEPA filter to the carbon dioxide gas tubing line, following the manufacturer’s instructions and any provided guidelines. Make sure the filter is securely attached and any tubing or fittings are properly connected. Pay attention to the correct orientation and positioning of the new filter.
- Close and Secure the Filter Housing: Once the new filter is installed, close the filter housing by securing any latches, screws, or connections that hold it in place. Ensure that the housing is tightly sealed to maintain proper filtration efficiency.
- Restore Power and Gas Supply: After completing the replacement process and confirming that everything is securely connected, restore the power to the incubator. Also, turn on the carbon dioxide gas supply and check for any gas leaks. Monitor the system for a period of time to ensure proper functionality.
What are the Tips for Heracell 150i Hepa Filter Replacement?
- Ensure optimal performance by avoiding HEPA filter replacement when the incubator pressure is set excessively high.
- Do not change the filter if the incubator experiences temperature issues unrelated to the filter.
- Similarly, refrain from replacing the filter if carbon dioxide levels fluctuate without filter-related concerns.
- In case of any uncertainties, contact the principal firm for clarification and guidance on Heracell 150i HEPA filter replacement.
What is the current price of Hepa Filter for CO2 Incubator Heracell?
Discover the latest pricing for Heracell CO2 Incubator Hepa Filters. Please note that prices may fluctuate based on the principal firm’s policies. For real-time pricing information, visit our website, where you can verify and stay updated on the current costs of Filter.
Product Warranty / Returnable
- Warranty: Not Applicable.
- Returnable: Non-Returnable.
